telison@telison.com    +8615389404063
Cont

Have any Questions?

+8615389404063

Rectangular/Square Enamelled Wire
video
Rectangular/Square Enamelled Wire

Rectangular/Square Enamelled Wire

● Square enameled wire is a magnet winding conductor built on a near-square copper (or aluminium) core that carries one or more layers of high-temperature-resistant insulating enamel
● Square wire packs in a near-touching arrangement, raising slot fill to 65–80% and increasing copper content by 20–30% within the same slot and the same volume
● For the same number of turns in the same slot, square wire reaches an equivalent copper cross-section with a shorter conductor length, reducing DC resistance by typically 15–20%
● Square conductors contact each other over faces rather than points, greatly enlarging the conduction path; winding temperature rise is typically about 10% lower than with round wire
● A rectangular section has a smaller equivalent thickness, and fewer parallel layers are needed for a given cross-section, which reduces AC copper loss from skin and proximity effects.
● Uniform film with low eccentricity; good adhesion and flexibility for hairpin bending; heat-shock resistance; resistance to solvents and refrigerants; high batch-to-batch consistency; smooth, burr-free surface
Send Inquiry

Product Introduction

 

Description

 

Telison's square enameled wire - also called rectangular enameled wire - is a magnet winding conductor built on a rectangular or near-square copper (or aluminium) core that carries one or more layers of high-temperature-resistant insulating enamel. A product is fully described by four basic parameters: the narrow dimension a, the wide dimension b, the width-to-thickness ratio b/a, and the corner radius R, together with enamel chemistry, film grade and thermal class.

 

The latest rectangular enamelled wire series was developed on a tandem dual-furnace enamelling line for self-bonding flat wire. Building on the existing process, the line and its parameters were optimised and upgraded: by tuning enamel viscosity, felt settings and other process parameters, the company achieves uniform enamel coverage and highly stable, repeatable production of rectangular enamelled wire.


With its high slot fill factor, low DC resistance, excellent heat dissipation and low high-frequency loss, it is widely used in the windings of high-power, space-constrained electrical equipment such as traction motors for new energy vehicles, PV and energy-storage converters, high-power transformers and servo motors..

product-1000-667
product-1000-667

 

Features

 

  • Higher slot fill factor: Square wire packs in a near-touching arrangement, raising slot fill to 65–80% and increasing copper content by 20–30% within the same slot and the same volume. 

  • Lower DC resistance: For the same number of turns in the same slot, square wire reaches an equivalent copper cross-section with a shorter conductor length, reducing DC resistance by typically 15–20% (10–20% depending on the application). Since copper loss scales with the square of current, the reduction converts directly into higher efficiency and lower heat generation.
  • Better heat dissipation: Square conductors contact each other over faces rather than points, greatly enlarging the conduction path; winding temperature rise is typically about 10% lower than with round wire. The lower rise not only extends insulation life but also lets the vehicle sustain high power output for longer under hot conditions.
  • Lower high-frequency loss: A rectangular section has a smaller equivalent thickness than a round diameter, and fewer parallel layers are needed for a given cross-section, which reduces AC copper loss from skin and proximity effects. 

  • Manufacturing consistency and inspectability: Conductors are usually shaped by continuous extrusion or precision drawing, with corner radius and width-to-thickness ratio both held inside tolerance; coating involves multiple passes of enamel application and curing, supported by in-line high-voltage pin-hole testing and in-line conductor/film dimensional monitoring for metre-by-metre quality judgement. 

 

 

Specifications

 

Products Size Range: Wide: 0.50-7.00mm Thickness: 0.08-1.60mm  Minimum Insulation Thickness: 0.01mm(Single Side)
 

Base insulation

UEW,EI/AIW,AIW,PIW,SEIW,HB***

Conductor Material Pure copper; copper and aluminium
Thermal Class

180,200,220,240

Equivalent round wire

0.25~2.60mm

Cross-sectional area

0.05~5.00mm2

Width-to-thickness ratio 1-10

 

 

 

Certificate

 

product-1510-714

The product has been certificated by SGS and UL

 

 

 

Application

 

The company conducted a competitive advantage analysis to identify its strengths and weaknesses compared to its rivals.

EV traction motors

The densest application is the hairpin stator winding. With integrated e-drive units, windings must simultaneously deliver high slot fill, high PDIV and oil resistance.

01

Photovoltaics and energy storage

Boost inductors and transformers in string inverters, and filter inductors and dry-type transformers in power conversion systems, are commonly wound with square or flat wire.

02

transformers and reactors

Low-voltage windings of dry-type transformers, high-current reactors and welding-equipment transformers use larger rectangular sections.

03

Servo motors and humanoid robots 

Servo motors, robot joint actuators and CNC spindles target high torque density and low cogging torque; square wire helps suppress vibration and noise.

04

Charging and wireless power

Resonant inductors in on-board chargers, wireless-charging coils, and thin-profile transformers and inductors in consumer electronics all use square wire. 

05

 

 

 

FAQ

 

 

Q: Are Square And Flat Enameled Wire The Same Product?

A: Both belong to the same standard family - enamelled rectangular copper winding wire - and differ in aspect ratio and corner-radius control. Orders should specify a×b, aspect ratio and corner-radius tolerance rather than relying on the name alone.

Q: Why Is DC Resistance Lower?

A: Higher fill shortens the conductor length needed for a given power, and a rectangular section packs more copper into the same envelope. Together these reduce DC resistance by 15–20%. In motors where copper loss dominates, this shows up directly as higher efficiency and lower temperature rise.

Q: Is Square Wire Better Than Litz Wire At High Frequency?

A: Not necessarily. Square wire performs well in the tens-of-kHz range at high current with few layers; at higher frequencies or with more layers, proximity effect dominates again and multi-strand or Litz constructions are superior. Selection should follow actual frequency, current waveform and layer count rather than a single figure of merit.

 

 

Hot Tags: rectangular/square enamelled wire, China rectangular/square enamelled wire manufacturers, suppliers, factory

Send Inquiry

(0/10)

clearall